Search this site
- Products
- G-Tape setting calculation
- Corrugated board
Corrugated board
Please select flute type.
| Flute type | Creasing rule | 3pt (1.0mm) | 4pt (1.4mm) | 6pt (2.0mm) | 8pt (3.0mm) | Recommended creasing rule |
|---|---|---|---|---|---|---|
| G flute | Diecut from top side | *A-0622 | B-0626 | 23.1x3pt | ||
| Diecut from bottom side | *A-0624 | B-0627 |
* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule
*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
-
A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
-
B type (4pt 1.4mm creasing rule, width 15mm)
G-Tape (creasing matrix)
| Flute type | Creasing rule | 3pt (1.0mm) | 4pt (1.4mm) | 6pt (2.0mm) | 8pt (3.0mm) | Recommended creasing rule |
|---|---|---|---|---|---|---|
| F flute | Diecut from top side | *A-0624 | B-0627 | 23.0×3/4pt | ||
| Diecut from bottom side | *A-0625 | B-0630 |
* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule
*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
-
A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
-
B type (4pt 1.4mm creasing rule, width 15mm)
G-Tape (creasing matrix)
| Flute type | Creasing rule | 3pt (1.0mm) | 4pt (1.4mm) | 6pt (2.0mm) | 8pt (3.0mm) | Recommended creasing rule |
|---|---|---|---|---|---|---|
| E flute | Diecut from top side | A-0624 | *B-0627 | C-0832 | 23.0x4pt | |
| Diecut from bottom side | S-0627 | *B-0630 | C-0835 |
* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule
*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
-
A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
-
B type (4pt 1.4mm creasing rule, width 15mm)
-
C type (6pt creasing rule, width 15mm)
-
S type (2-3pt creasing rule, width 15mm)
G-Tape (creasing matrix)
| Flute type | Creasing rule | 3pt (1.0mm) | 4pt (1.4mm) | 6pt (2.0mm) | 8pt (3.0mm) | Recommended creasing rule |
|---|---|---|---|---|---|---|
| E flute (Topside cardboard) | Diecut from top side | A-0825 | *B-0830 | C-0835 | 23.0x4pt | |
| Diecut from bottom side | S-0630 | *B-0632 | C-0835 |
* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule
*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
-
A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
-
B type (4pt 1.4mm creasing rule, width 15mm)
-
C type (6pt creasing rule, width 15mm)
-
S type (2-3pt creasing rule, width 15mm)
G-Tape (creasing matrix)
| Flute type | Creasing rule | 3pt (1.0mm) | 4pt (1.4mm) | 6pt (2.0mm) | 8pt (3.0mm) | Recommended creasing rule |
|---|---|---|---|---|---|---|
| B flute | Diecut from bottom side | S-0830 | *B-0835 | C-0840 | D-0950 | 23.0×4/6pt |
* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule
*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
-
B type (4pt 1.4mm creasing rule, width 15mm)
-
C type (6pt creasing rule, width 15mm)
-
D type (8pt creasing rule, width 15mm)
-
S type (2-3pt creasing rule, width 15mm)
G-Tape (creasing matrix)
| Flute type | Creasing rule | 3pt (1.0mm) | 4pt (1.4mm) | 6pt (2.0mm) | 8pt (3.0mm) | Recommended creasing rule |
|---|---|---|---|---|---|---|
| C flute | Diecut from bottom side | S-0835 | *B-0840 | *C-0845 | D-0855 | 22.8×4/6pt |
* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule
*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
-
B type (4pt 1.4mm creasing rule, width 15mm)
-
C type (6pt creasing rule, width 15mm)
-
D type (8pt creasing rule, width 15mm)
-
S type (2-3pt creasing rule, width 15mm)
G-Tape (creasing matrix)
| Flute type | Creasing rule | 3pt (1.0mm) | 4pt (1.4mm) | 6pt (2.0mm) | 8pt (3.0mm) | Recommended creasing rule |
|---|---|---|---|---|---|---|
| A flute | Diecut from bottom side | B-0840 | *C-1050 | C-1060 | 22.8×6/8pt |
* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule
*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
-
B type (4pt 1.4mm creasing rule, width 15mm)
-
C type (6pt creasing rule, width 15mm)
G-Tape (creasing matrix)
| Flute type | Creasing rule | 3pt (1.0mm) | 4pt (1.4mm) | 6pt (2.0mm) | 8pt (3.0mm) | Recommended creasing rule |
|---|---|---|---|---|---|---|
| FE double flute | Diecut from bottom side | *S-0727 | *B-0732 | C-0740 | D-0750 | 23.1×3/4pt |
* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule
*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
-
B type (4pt 1.4mm creasing rule, width 15mm)
-
C type (6pt creasing rule, width 15mm)
-
D type (8pt creasing rule, width 15mm)
-
S type (2-3pt creasing rule, width 15mm)
G-Tape (creasing matrix)
| Flute type | Creasing rule | 3pt (1.0mm) | 4pt (1.4mm) | 6pt (2.0mm) | 8pt (3.0mm) | Recommended creasing rule |
|---|---|---|---|---|---|---|
| EE double flute | Diecut from bottom side | S-0830 | *B-0835 | C-0840 | D-0850 | 23.0×4/6pt |
* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule
*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
-
B type (4pt 1.4mm creasing rule, width 15mm)
-
C type (6pt creasing rule, width 15mm)
-
D type (8pt creasing rule, width 15mm)
-
S type (2-3pt creasing rule, width 15mm)
G-Tape (creasing matrix)
| Flute type | Creasing rule | 3pt (1.0mm) | 4pt (1.4mm) | 6pt (2.0mm) | 8pt (3.0mm) | Recommended creasing rule |
|---|---|---|---|---|---|---|
| EB double flute | Diecut from bottom side | B-0840 | *C-1050 | D-1060 | 22.8×4-8pt |
* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule
*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
-
B type (4pt 1.4mm creasing rule, width 15mm)
-
C type (6pt creasing rule, width 15mm)
-
D type (8pt creasing rule, width 15mm)
G-Tape (creasing matrix)
| Flute type | Creasing rule | 3pt (1.0mm) | 4pt (1.4mm) | 6pt (2.0mm) | 8pt (3.0mm) | Recommended creasing rule |
|---|---|---|---|---|---|---|
| EC double flute | Diecut from bottom side | B-0845 | *C-1050 | D-1060 | 22.7×6/8pt |
* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule
*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
-
B type (4pt 1.4mm creasing rule, width 15mm)
-
C type (6pt creasing rule, width 15mm)
-
D type (8pt creasing rule, width 15mm)
G-Tape (creasing matrix)
| Flute type | Creasing rule | 3pt (1.0mm) | 4pt (1.4mm) | 6pt (2.0mm) | 8pt (3.0mm) | Recommended creasing rule |
|---|---|---|---|---|---|---|
| BC double flute | Diecut from bottom side | B-1045 | *C-1050 | *D-1060 | 22.2or22.3×6/8pt |
* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule
*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
-
B type (4pt 1.4mm creasing rule, width 15mm)
-
C type (6pt creasing rule, width 15mm)
-
D type (8pt creasing rule, width 15mm)
G-Tape (creasing matrix)
| Flute type | Creasing rule | 3pt (1.0mm) | 4pt (1.4mm) | 6pt (2.0mm) | 8pt (3.0mm) | Recommended creasing rule |
|---|---|---|---|---|---|---|
| AB double flute | Diecut from bottom side | B-1050 | *C-1060 | *D-1070 | 22.2×6/8pt |
* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule
*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
-
B type (4pt 1.4mm creasing rule, width 15mm)
-
C type (6pt creasing rule, width 15mm)
-
D type (8pt creasing rule, width 15mm)
G-Tape (creasing matrix)
Search this site
Products
- Package Template Maker
- G-Tape
- Cutting plates
- G-Tape setting calculation
- ECO-matrix (creasing matrix)
- Cutters for creasing matrix (G-Tape)
- Counter plate, pertinax
- Rubber
- Glue＆Cleaner
- Make-ready
- Nick tools
- Diemaking accessories
- Stripping accessories
- Blanking accessories
- Machine parts,accessories
- Anti-static electricity
- Printing materials
- Time/Cost saving devices
- Measuring instrument
- Oraganizing tools
Member organization
