DAISO | G-Tape creasing matrix


  • G-Tape
  • W type (Off-center, 2-4pt creasing rule)

W type (Off-center, 2-4pt creasing rule)

Unit = mm


The best creasing matrix to prevent creasing cracks in diecutting process. Wide selection from 155 standard to custom-made sizes, that satisfy any kind of requests from the customers. One touch setting makes it much easier even to set double-creasing types. G-Tape had passed hundred of thousands punch tests, and works very well between 200,000 and 300,000 presses in normal use. G-Tape can be used up to a half million presses without a set-change. International patented matrix cutter, VS-IV and G-Tape is the best solution for your productivity.
Width :10mm
Length :700mm


NameThicknessCreasing widthCreasing rule
W-04100.41.02-3pt 0.7-1.0mm
W-04130.41.32-3pt 0.7-1.0mm
W-04150.41.52-3pt 0.7-1.0mm
W-04170.41.72-3pt 0.7-1.0mm
W-05150.51.52-3pt 0.7-1.0mm
W-05170.51.72-3pt 0.7-1.0mm
W-05190.51.92-3pt 0.7-1.0mm
W-05210.52.12-3pt 0.7-1.0mm
W-05230.52.32-3pt 0.7-1.0mm
W-06150.61.52-3pt 0.7-1.0mm
W-06170.61.72-3pt 0.7-1.0mm
W-06190.61.92-3pt 0.7-1.0mm
W-06210.62.12-3pt 0.7-1.0mm
W-06240.62.42-3pt 0.7-1.0mm
W-08240.82.42-3pt 0.7-1.0mm
W-08270.82.72-3pt 0.7-1.0mm
W-08300.83.02-3pt 0.7-1.0mm
WL-06220.62.24pt 1.4mm
WL-06240.62.44pt 1.4mm
WL-06270.62.74pt 1.4mm
WL-06300.63.04pt 1.4mm
WL-08240.82.44pt 1.4mm
WL-08270.82.74pt 1.4mm
WL-08300.83.04pt 1.4mm


  1. Home
  2. Products
  3. Diecutting
  4. G-Tape
  5. W type (Off-center, 2-4pt creasing rule)
error: Content is protected !!